Saturday, 2022-12-10

openpowerbot[slack] <Roberto Innocenti> I have apparently successfully programmed via JTAG my CMOD A7 Fpga ( non clear how program via flash SPI)  first loading HelloWord and then loading Linux kernel but in both cases If I connect via minicom or putty or picocom nothing appear on the terminal, look like its a problem of CMOD A7 35T Fpga. Does anyone is able to program fine this Devkit ?  `fusesoc run --target=cmod_a7-35 microwatt --memo17:07
openpowerbot[slack] <Roberto Innocenti> I have apparently successfully programmed via JTAG my CMOD A7 Fpga ( non clear how program via flash SPI)  first loading HelloWord and then loading Linux kernel but in both cases If I connect via minicom or putty or picocom nothing appear on the terminal, look like its a problem of CMOD A7 35T Fpga. Does anyone is able to program fine this Devkit ?  `fusesoc run --target=cmod_a7-35 microwatt --memo17:08
openpowerbot[slack] <Roberto Innocenti> `microwatt/openocd/flash-arty -f a35 build/microwatt_0/cmod_a7-35-vivado/microwatt_0.bit`17:08
openpowerbot[slack] <Roberto Innocenti> `microwatt/openocd/flash-arty -f a35 linux/arch/powerpc/boot/dtbImage.microwatt.elf -t bin -a 0x300000`17:08
openpowerbot[slack] <Roberto Innocenti> I have apparently successfully programmed via JTAG my CMOD A7 Fpga ( non clear how program via flash SPI)  first loading HelloWord and then loading Linux kernel but in both cases If I connect via minicom or putty or picocom nothing appear on the terminal, look like its a problem of CMOD A7 35T Fpga. **Does anyone is able to program fine this Devkit ?**  `fusesoc run --target=cmod_a7-35 microwatt --17:08
openpowerbot[slack] <Roberto Innocenti> `microwatt/openocd/flash-arty -f a35 build/microwatt_0/cmod_a7-35-vivado/microwatt_0.bit`17:08
openpowerbot[slack] <Roberto Innocenti> `microwatt/openocd/flash-arty -f a35 linux/arch/powerpc/boot/dtbImage.microwatt.elf -t bin -a 0x300000`17:08
openpowerbot[slack] <Roberto Innocenti> I have apparently successfully programmed via JTAG my CMOD A7 Fpga ( not clear how program via flash SPI)  first loading HelloWord and then loading Linux kernel but in both cases If I connect via minicom or putty or picocom nothing appear on the terminal, look like its a problem of CMOD A7 35T Fpga. **Does anyone is able to program fine this Devkit ?**  `fusesoc run --target=cmod_a7-35 microwatt --17:09
openpowerbot[slack] <Roberto Innocenti> `microwatt/openocd/flash-arty -f a35 build/microwatt_0/cmod_a7-35-vivado/microwatt_0.bit`17:09
openpowerbot[slack] <Roberto Innocenti> `microwatt/openocd/flash-arty -f a35 linux/arch/powerpc/boot/dtbImage.microwatt.elf -t bin -a 0x300000`17:09
openpowerbot[slack] <Roberto Innocenti> Attached the output after successfully programmed : https://files.slack.com/files-pri/T443QD9JA-F04EN755MNX/download/successfully_programmed.txt17:12
openpowerbot[slack] <Roberto Innocenti> I have apparently successfully programmed via JTAG my CMOD A7 Fpga ( not clear how program via flash SPI)  first loading HelloWord and then loading Linux kernel but in both cases17:13
openpowerbot[slack] <Roberto Innocenti> If I connect via minicom or putty or picocom **nothing appear on the terminal**,17:13
openpowerbot[slack] <Roberto Innocenti> look like its a problem of CMOD A7 35T Fpga. **Does anyone is able to program fine this Devkit ?**  `fusesoc run --target=cmod_a7-35 microwatt --memory_size=16384 --ram_init_file=/media/roby/64b1775e-a48d-4d15-95bf-e80156ba9168/roby/ppc/microwatt/fpga/hello_world.hex`17:13
openpowerbot[slack] <Roberto Innocenti> `microwatt/openocd/flash-arty -f a35 build/microwatt_0/cmod_a7-35-vivado/microwatt_0.bit`17:13
openpowerbot[slack] <Roberto Innocenti> `microwatt/openocd/flash-arty -f a35 linux/arch/powerpc/boot/dtbImage.microwatt.elf -t bin -a 0x300000`17:13
openpowerbot[slack] <Roberto Innocenti> I have apparently successfully programmed via JTAG my CMOD A7 Fpga ( not clear how program via flash SPI)  first loading HelloWord and then loading Linux kernel but in both cases17:16
openpowerbot[slack] <Roberto Innocenti> If I connect via minicom or putty or picocom **nothing appear on the terminal**,17:16
openpowerbot[slack] <Roberto Innocenti> look like its a problem of CMOD A7 35T Fpga. **Does anyone is able to program fine this Devkit ?**17:16
openpowerbot[slack] <Roberto Innocenti> `fusesoc run --target=cmod_a7-35 microwatt --memory_size=16384 --ram_init_file=/media/roby/64b1775e-a48d-4d15-95bf-e80156ba9168/roby/ppc/microwatt/fpga/hello_world.hex`17:16
openpowerbot[slack] <Roberto Innocenti> 17:16
openpowerbot[slack] <Roberto Innocenti> `microwatt/openocd/flash-arty -f a35 build/microwatt_0/cmod_a7-35-vivado/microwatt_0.bit`17:16
openpowerbot[slack] <Roberto Innocenti> 17:16
openpowerbot[slack] <Roberto Innocenti> `microwatt/openocd/flash-arty -f a35 linux/arch/powerpc/boot/dtbImage.microwatt.elf -t bin -a 0x300000`17:16

Generated by irclog2html.py 2.17.1 by Marius Gedminas - find it at https://mg.pov.lt/irclog2html/!