| lkcl | roberto: yes, although i have had it running with an older version, using nextpnr-xilinx, and a couple of 256 megabit HyperRAM PMODs from 1bitsquared.de | 14:51 |
|---|---|---|
| lkcl | that was with the ls2 framework https://libre-soc.org/HDL_workflow/microwatt/ | 14:52 |
| lkcl | https://libre-soc.org/HDL_workflow/nextpnr-xilinx/ | 14:52 |
| lkcl | https://libre-soc.org/HDL_workflow/ls2/ | 14:53 |
| lkcl | you need to compile our "external core" target | 14:53 |
| lkcl | if however you want to follow joel shenki's instructions they're on the first link i posted, but when you get to downloading a pre-compiled initramfs you can get one from the libre-soc ftp site. | 14:54 |
| lkcl | bear in mind it is ABSOLUTELY your responsibility without question or hesitation when downloading pre-compiled binaries from an arbitrary site | 14:55 |
| lkcl | bear in mind for joel shenki's instructions you need the xilinx proprietary toolchain, whereas if you use ls2 (which has an older version of microwatt - still functional) it's entirely a Libre FPGA toolchain. and you *will* need two of those biggest HyperRAM PMODs | 14:56 |
| lkcl | don't get the a7-35t by mistake | 14:57 |
| lkcl | don't get the smaller 32 megabit HyperRAM PMODs by mistake | 14:57 |
Generated by irclog2html.py 2.17.1 by Marius Gedminas - find it at https://mg.pov.lt/irclog2html/!